Many plant collectors’ wish lists include the “Philodendron Pink Princess,” a beautiful and sought-after specimen.
Its dark green, heart-shaped leaves with pink spots catch the eye. This plant is a one-of-a-kind specimen in the plant kingdom. In a nutshell, here’s how to care for the plant:
Pink Princess Philodendron grows best in bright indirect light and moist, well-drained soil. Keep the plant between 63-80 °F (17-27 °C) and avoid temperatures below 60 °F. Apply a slow-release fertilizer in the spring to keep your plants healthy. Pruning the plant’s lower leaves is necessary to keep it looking good. Resistant to pests and diseases to a moderate degree.
It is critical to learn how to properly care for your Philodendron to keep its distinctive pink color. For the most part, philodendrons don’t require much in the way of special attention.
How to take care of a Pink Princess Philodendron
The plant is indigenous to Colombia. It is an aroid plant from the tropics. This brightly colored plant is relatively simple to take care of.
However, there are a few key points to remember. These will aid in the preservation of the leaves’ distinct color.
Because of its pink, variegated appearance, there are some care instructions.
Colorful dark maroon-green leaves with light pink spots can be maintained if you follow these guidelines.
Pink Princess Philodendron Needs A Lot of Light To Thrive
When growing this plant, it is critical to have enough light.
The pink-speckled leaves will quickly turn green if they don’t get enough sunlight. As a result, the plant’s stunning variety will be lost.
Princess thrives in a well-lit environment but prefers indirect light. This type of lighting promotes healthy growth and even variegation.
A little sunlight is beneficial, but do not place this plant in direct sunlight, or it will suffer damage. It’s especially true in hot areas.
If you don’t have enough light in your house, I recommend purchasing an LED lamp for this plant.
If there isn’t enough sunlight, the pink princess leaves will quickly turn green and lose their stunning variegation.
It necessitates organically rich soil, both aerated and well-drained, for the plant to thrive.
There should be enough nutrients, but not so much that it becomes waterlogged; this is the ideal soil for Pink Princess Philodendron.
Perlite, orchid bark, and a standard indoor plant soil mix are best for the pink princess.
Aerial roots characterize this philodendron variety, common among aroids and similar plants.
They absorb moisture and nutrients from the air. The plant also has roots that penetrate the ground.
As a result, you can grow it in a soil-free mixture such as sphagnum moss or peat, perlite.
Let the top of the soil dry out, about 2 inches or so, and then water well. Make sure the soil isn’t too wet for the plant.
Philodendrons are susceptible to root rot. It’s best to wait until the next day if you’re unsure if it needs water. This guide will show you how to water your philodendron in great detail.
Temperature And Relative Humidity
Philodendron thrives in warm, humid climates. These hardy plants thrive in typical home temperature and humidity conditions.
Keep the plant between 63-80 °F (17-27 °C), and avoid exposing it to temperatures below 60 °F.
The plant prefers humid air. Low humidity could cause new leaves that are smaller and even wrinkled.
In the winter, the air in your home is so dry that it hurts. You may need to spray your Philodendron during heating season because this is bad for plants.
Your plant will appreciate it if you can provide at least 50% humidity.
Every month during the growing season (spring and summer) of Philodendron, it is necessary to apply fertilizer.
A well-balanced liquid fertilizer is the best choice. When the plant enters dormancy in early fall, stop fertilizing it.
Your plant will need to be transplanted every year or two as long as it is doing well in its current pot.
A larger pot is necessary if you remove the plant from the pot and notice a lot of roots on all sides and even a circle around the bottom of the pot.
You can transplant at any time of year. However, spring or summer are the best times to go if you’re starting.
Despite being a princess, even princesses require assistance.
Philodendron is a climbing plant by nature. As a result, provide it with a trellis or pole that it can climb. Tie the stem loosely to the support structure as it grows.
This plant will produce the best results if you provide adequate care.
Your plant will appreciate the support, whether provided by a moss pole, a cedar plank, or any other means.
Let’s get to the important stuff now!
People frequently ask how to make all of the leaves pink on the forums. However, be careful what you wish for.
Pink leaves have no chlorophyll. Without chlorophyll, there is no nutrition. If you treat your plant in this manner, it will starve and die.
You’ll need a mix of green and mottled leaves. You will need to prune your plant if it has started to grow all green or all pink leaves.
Growth from the node where the leaf was cut should result in a more variegated increase.
Leaf growth occurs at “nodes,” which are the points where the stem and the leaf meet, resulting in new development.
Pink Princess Philodendron Propagation
Pink princesses, like most philodendrons, can be propagated by stem cuttings.
Not only will this assist you in creating a new plant that you can share with a friend.
This propagation will result in a more lush plant and will help to promote diversity, especially if your plant’s leaves have begun to fall off.
In just a few steps, you can propagate philodendron cuttings:
- First, decide where you want to cut the plant’s stem. Cut so that the cuttings have 2-3 leaves and 2-3 open nodes at the bottom.
- To cut the stem and separate the cuttings, use sharp, sterilized scissors or secateurs.
- Remove all lower leaves, leaving only 2-3 at the top.
- Set aside the cuttings for 12 to 24 hours to harden the cut edge.
- Place the cuttings in water once the edge has coarsened. Place it in an area with bright, indirect light.
- Keep the exposed nodes submerged and in the water at all times.
- Within 2-3 weeks, you should see new roots sprout from the cuttings.
- Transfer the cuttings into the soil when the roots have grown 1-1.5 inches (2-3 centimeters) in length. Use a well-draining mixture and plenty of water.
Common Pests And Diseases
Philodendron rose princess is susceptible to various common houseplant pests and diseases.
Powdery mildew, aphids, spider mites, and fungus gnats are common pests.
Root rot, caused by overwatering, and rust, caused by a fungal infection, are two common diseases.
Philodendron Root Rot
Have the leaves on your Philodendron turned yellow, blackened, or drooped? Does your plant appear to be sickly? You could be suffering from root rot.
This is a severe issue brought on by overwatering. If the soil has recently been overwatered and an unpleasant odor emanates from the pot, it is time to act.
Here is a detailed article on how to save your philodendron from root rot.
How to Treat Root Rot:
- Remove the plant from the pot and examine the roots. They’ll be slimy, soft, brownish or black, and stink. If the problem has progressed, the lesion may move to the lower part of the stem.
- Without exception, remove all diseased tissue. If all roots must be removed, so be it. The plant will regrow. It is preferable to remove too much than to remove too little and leave affected areas.
- Allow the roots to dry after dipping them in a 3 percent hydrogen peroxide and water mixture. Fungi and pathogens that cause root rot are effectively killed by hydrogen peroxide (1:3).
- Plant the Philodendron in a pot with a drainage hole in dry soil. Ensure to follow all of the precautions so that this does not happen again.
Proper lighting, good drainage, and knowing when to water rather than on a schedule are all great allies in preventing future root rot problems.
Common Philodendron Pink Princess Growing Issues
Philodendrons are relatively trouble-free to grow if adequately cared for.
The most common problems with these tropical plants are caused by insufficient watering, moisture, or lighting.
Blackening And Drying of The Leaf Edges
Pink princess philodendron leaves often develop darker edges because of a lack of moisture. As a result, the leaves begin to dry out.
Unfortunately, if damage occurs, there is no way to repair it. However, increasing the moisture around the plant should help to prevent further darkening.
Brown Spots on Leaves
Brown spots are the last thing you want to see on your lovely pink leaves.
Unfortunately, this can happen if your plant has been exposed to too much harsh light.
When exposed to direct sunlight, the delicate pink spots on the leaves are quickly burned.
As previously stated, it can also result from a lack of moisture.
Philodendron Leaves Twist And Curl
Some philodendron varieties have a natural tendency to curl their leaves. However, if it becomes excessive, pay close attention to the circumstances.
It can happen near a window with a single pane of glass or in the presence of a draft. It is possible if you use air conditioning.
Inadequate moisture is another common cause of philodendron leaf curling. After all, the plant is tropical!
A lack of water may exacerbate this problem. Overwatering, on the other hand, is more common than underwatering.
Philodendron With Yellow Leaves
It’s not always bad if your plant has one or two yellowed leaves below.
However, it’s a usual leaf replacement process if it’s growing well and the yellowing isn’t too severe.
Do you notice any unusual yellowing? Or are the new leaves turning yellow?
The most likely cause is overwatering. Excessive moisture can wreak havoc on the roots.
Other common causes of yellowing philodendron leaves include:
- Too much direct sunlight without adequate acclimatization. When exposed to direct sunlight for an extended period, leaves can become burned.
- Pests. Check the underside of the leaves for any unwanted visitors.
- Deficiencies in nutrients Have you recently transplanted the plant or given it fertilizer? If it is actively growing, it may require additional nutrients.
Answers to Common Questions
Why Does Philodendron Rose Princess Take So Long To Grow?
It will grow slower than its non-foliated counterpart because it has less chlorophyll, just like any variegated plant.
What’s The Deal With Philodendron’s Pink Princess Being So Pricey?
Because of their stunning foliage, these tropical plants have quickly gained popularity.
Growers find it challenging to keep up with demand due to the increased popularity.
The cost is exceptionally high because these plants are difficult to grow from seed. This color is the result of a genetic mutation.
This has resulted in exorbitant prices, even though pink princesses are relatively easy to care for.
Why Does The Pink Color of The Philodendron Pink Princess Fade?
It’s most likely because of a lack of light. Make sure your plant is getting plenty of bright, diffused light. To encourage strong variegation, avoid low light conditions.
How Do I Get Variegated Philodendron Pink Princess Back?
Proper care results in attractive leaf coloration. If there is no spotting on the new leaves, the plant is not getting enough light.
If there isn’t enough light, the pink-spotted leaves will quickly turn green.
However, if you give it a more bright, non-direct color, it will play up the colors.
Why Does The Philodendron Pink Princess Grow Longer?
Stretching and increased growth indicate that your plant is receiving insufficient light.
As a result, the leaves are attempting to reach for more light. To avoid new shoots, relocate it to a brighter location.
How Big Can The Plant Grow?
They can grow to a meter in height with proper care and conditions. It is critical to assist the plant.
Is The Philodendron Pink Princess Toxic To Pets?
Like all aromatic plants, Philodendron is toxic to dogs and cats due to insoluble calcium oxalates.
Can I Grow Multiple Philodendron Pink Princess In The Same Pot?
Without a doubt! This is one method for creating a more lush appearance.
Planting two plants in the same pot is not a bad idea. It all comes down to personal preference.